Friday, January 14, 2011

Fix: Bluetooth devices do not work after computer resumesfromhibernation, sleep and standby

If you’re using a Bluetooth enabled audio device or connection with the computer, you might have noticed that the connection loses after it resumes from the hibernation or the sleep mode. You can simply follow the procedure given below to fix this issue.
•    Open the control panel by clicking on the start button.
•    Now, it is required to select the Hardware and Sound option from the control panel window.
•    Then, it is required to select the Bluetooth Devices option in the Hardware and Sound window.



•    Now, you’ve to check the box next to My device is setup and ready to be found.
•    After that, click on the Next button.
•    Then, power ON the Bluetooth audio device to configure it for discoverability.
•    In the computer window, click to select the appropriate Bluetooth audio device and then click the Next button.
•    Now, it is required to select Use the passkey found in the documentation.
•    Therefore, it is required to enter the appropriate passkey and then click the Next button.
•    You can refer to the documentation of the Bluetooth audio device for the proper passkey if you don’t know it.



•    Now, click the Finish button.
•    Then, select the Audio tab in the Bluetooth Devices window.
•    In the audio tab, click to select the appropriate Bluetooth audio device and then click the connect button.
•    If the Bluetooth audio device shows that it is already connected, you can simply skip this step.
•    Then, click on the Apply button and close the Bluetooth Devices window.